Other Useful Information
Cleaning and Maintenance
•
Before cleaning the Wildlife Camera, ensure the Wildlife Camera is switched off
and disconnected from any power source.
•
The Wildlife Camera is likely only to require regular "dusting" to keep it clean. Use
a standard duster, or dry soft microfibre cloth to remove the dust from the Wildlife
Camera. Remove dust from the Wildlife Camera regularly.
•
If the Wildlife Camera becomes soiled with anything other than dust on its
exterior, clean the exterior of the Wildlife Camera by wiping over the surface with
a slightly damp cloth and then polish with a soft dry cloth.
•
Be careful when wiping over the Wildlife Camera, that you do not apply too much
pressure, as there is a risk that you may break parts.
•
Do not use detergents or abrasive cleaners, and do not allow moisture, water or
other liquid to enter the Wildlife Camera.
Storage
When the Wildlife Camera is not in use, disconnect it from any power source and
store in a cool, dry and well ventilated location out of direct sunlight. Ensure that it is
not subject to humidity.
AFTER SALES SUPPORT
1300 777 137
MODEL: EA1427 PRODUCT CODE: 6568 04/2019
service@unclebills.com.au
15
Need help?
Do you have a question about the EA1427 and is the answer not in the manual?