SIGNIFY EA1427 Instruction Manual page 13

Instructions (cont)
Menu Menu
Beep sound
Serial No
Format
memory card
Reset
settings
Version
3. To take a picture: press Down key first, then press OK key.
4. To record video: press Up key first, and then press the OK key.
Automatic Working Mode
After setting and saving the parameters, slide the switch to the ON position (LCD
display 5-1 countdown to shutdown), the camera enters the automatic sensing mode.
Off Mode
After shooting, please slide the switch to the OFF position, the wildlife camera enters
shutdown mode (Please remove the batteries from the wildlife camera when not being
used for a long period).
Playback Pictures and Videos
Playback file on the camera: Switch the wildlife camera to test mode. Press
1.
SHOT/PLAY key to enter playback mode, photos can be selected through the
UP or Down keys to view, video files must be selected and press OK key to play.
View file on PC: Check that the batteries are inserted correctly into the Wildlife
2.
Camera. Next, ensure the camera is shut down, connect the camera to the
computer with the USB cable, and then you can view the file directly on the PC.
3. It may take a few minutes to load all files.
AFTER SALES SUPPORT
1300 777 137
Set Parameters
ON/OFF
ON/OFF
ON/OFF
YES/NO
YES/NO
Description
Select ON if you want to hear a beep sound when
setting up camera.
If setting a serial number, all photos taken by the
camera will show that set of serial number.
Erase all files or data on SD Card or save all data
on SD Card (note: this cannot be undone).
All parameters will be set the same as factory
Default setting.
Check software version number will assist for
repairs or upgrades.
MODEL: EA1427 PRODUCT CODE: 6568 04/2019
service@unclebills.com.au
13