SIGNIFY EA1427 Instruction Manual page 12

Instructions (cont)
Menu Menu
Delay
Sensitivity
motion
sensors
(PIR Trigger
Sensitivity )
Target
recording
time
Time lapse
Language
Time&data
Photo stamp
Temp Unit
Password
protection
AFTER SALES SUPPORT
12
1300 777 137
Set Parameters
5S-60minutes
High
Middle
Low
ON/OFF
ON/OFF
Deutsch/English
Français/Slovencina
Norsk/Dansk
Svenska/Pyccкий
Español/Italiano
Set time & date
Time format
Date format
Time & date
Date
OFF
Celsius / Fahrenheit
ON/OFF
Description
Selects the length of time that the camera will "wait"
until it responds to any additional triggers from the
PIR after an animal is first detected and remains
within the sensor's range. During this user set
"ignores triggers" interval, the camera will not capture
photos/videos. This prevents the card from filling up
with too many redundant images. Settings begin with
5s default when parameter is first selected.
Choose sensitivity of PIR. The higher the
sensitivity, the easier the motion sensor would
be triggered. It is recommended to use Middle
mode. The sensitivity of PIR is strongly related
to the temperature. Higher temperature leads to
lower sensitivity.
Set the time the camera will start to record and
time the camera will stop recording.
If set on, camera will automatically take photos
or videos at the set interval (Note: in this mode,
the PIR sensor is disabled). This is helpful when
observing cold-blooded animals like snakes or
the growth of a flower. This function can work
together with timer.
Choose your language of choice. It supports
several languages: Deutsch, English, Francais,
Slovencina, Norsk, Dansk, Svenska, Pyccкий,
Español, Italiano.
Enter into Date/Time setting Menu, you can select
24 hours or 12 hours format and press OK to
confirm the setting.
Select on if you want date, time and moon phase
printed on every photo taken by camera, and
select off for no imprint.
Select either Celsius or Fahrenheit.
Setup a password to protect your camera.
MODEL: EA1427 PRODUCT CODE: 6568 04/2019
service@unclebills.com.au