Instructions - SIGNIFY EA1427 Instruction Manual

Instructions

Turning on the Camera
Set Test Mode
1. Slide the switch to the SETUP position, then the camera will start, display logo,
enter Setup Test mode. Press MENU to enter parameter settings (If the camera
does not operate within 120 seconds, the camera will automatically shut down,
at this time, please slide the switch back to the OFF position and then dial to the
SETUP position to restart).
2. Press Menu key to enter into menu or exit. The OK button is used to confirm the
setting, UP, Down, Left and Right key can be used to choose function mode and
setup camera. Shot/Play key is used to take photos or videos manually and also
playback photos or videos on LCD.
The main purpose of the SETUP mode is to allow you to change the settings of the
camera's Parameters, so your camera operates exactly the way you want it to. You will
do this by entering the SETUP then select MENU and pressing the keys below the LCD
display which will show you each parameter and its setting.
Menu Menu
Mode
Photo
Resolution
Photo Series
Video
Resolution
Video length
Audio
recording
AFTER SALES SUPPORT
1300 777 137
Set Parameters
Photo / Video
Photo & video
3MP / 5MP / 8MP
1 Photo / 2 Photos / 3
Photos in series
1920X1080P /
1280X720P / 640X480P
10S / 20S / 30S / 60S
ON / OFF
Description
There are three camera modes: Photo, Video and
Pic+Video.
Choose the image size: 3MP, 5MP or 8MP.
Choose the continuous shooting number of
photos after each triggering.
Choose the video resolution:
1920X1080,1280X720 or 640X480.
Choose duration of recording video.
There are 4 options available: 10S, 20S, 30S and
60S.
If choose ON, camera will record sound in video
mode, otherwise it won't record sound.
MODEL: EA1427 PRODUCT CODE: 6568 04/2019
service@unclebills.com.au
11