Cochlear Nucleus CP802 User Manual page 12

1. Twist the processing unit and the upper end of the battery pack
cable together to separate the two parts.
2. Pull the lower end of the battery pack cable away from the battery
pack.
To remove the battery pack from the battery pack clip, twist and pull
the battery pack away from the battery pack clip.
Place the processor on the ear
1. Place the processor on the
ear as shown.
12 - CP802 Sound Processor User Guide
2. Place the coil on the head
over the implant. The coil
magnet will hold the coil in
place over the implant.
© Cochlear Limited 2016