Advertisement
3. Connect your TC4400 to your service provider's
network
1 Take a coaxial cable.
2 Connect one end to a cable outlet or a splitter connected to a cable outlet.
3 Connect the other end to the cable port (
4. Power on your TC4400
1 Plug the connector of the electric power supply adapter into the TC4400 power
inlet port (
2 Plug the adapter into a nearby power outlet.
3 If your TC4400:
ƒ Is equipped with a power button (
your TC4400.
not
ƒ Is
equipped with a power button (
powered on.
4 After a few minutes, the Online LED must be solid green.
If the DS and US LEDs are blinking at the same time, your TC4400 is
updating its software. If this is the case, wait until the upgrade has been
completed. This can take several minutes! Do not power off your TC4400
or unplug any cables!
).
) of your TC4400.
) then press the power button to power on
) then your TC4400 is already
2
Advertisement
