Invacare Storm Series Service Manual page 39

BACK FRAME
17. If necessary, reposition the spreader bar at the cor-
rect height for the corresponding back height and
torque the mounting hardware to 60-inch pounds.
Back Cane
(STEPS 3, 10)
Mounting
Screw
(STEPS 2, 14)
Washer
(STEPS 2, 14)
Back
Upholstery
Locknut
(STEPS 6,11)
Mounting
Screw
(STEPS 6,11)
Insert
(STEPS 4,8)
Mounting Screws
Torque to 75 in/lbs
(STEPS 3, 13)
Washers
(STEPS 3, 13)
All manuals and user guides at all-guides.com
18. Reinstall the armrest onto the wheelchair. Refer to
Spacers
(STEPS 3, 13)
Locknuts
(STEPS 3, 13)
Seat Frame
FIGURE 2 - CHANGING BACK HEIGHT
39
INSTALLING/REMOVING FLIP BACK ARMRESTS
in PROCEDURE 4 of the owner’s manual, 1081227.
PROCEDURE 8
Locknut
(STEPS 6,11)
Spreader Bar
(STEPS 6,17)
Mounting Screw
Torque to 60 in/lbs
(STEPS 6,11)
Mounting Screws
(STEPS 3, 13)
Washers
(STEPS 3, 13)
B
A
C
K
F
R
A
M
E