GreenWorks CSE402 Operator's Manual
  1. Manuals
  2. Brands
  3. GreenWorks Manuals
  4. Chainsaw
  5. CSE402
  6. Operator's manual

GreenWorks CSE402 Operator's Manual

Hide thumbs Also See for CSE402:
Table of Contents

Advertisement

Quick Links

CSE402
1.
5.
9.
23
24
25
25
24
2.
6.
21
20
10.
26
50mm
28
27
50mm
29
3.
7.
22
11.
30
31
4.
8.
12.
33
32

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CSE402 and is the answer not in the manual?

Questions and answers

peter russell
June 2, 2025

I put chain oil into the top but it does not go into the reservoir.

0
1 comments:
Mr. Anderson
June 2, 2025

The chain oil may not be going into the reservoir due to contamination causing a blockage in the oil tank or discharge port. Cleaning the oil tank and adding new lubricant can solve the issue.

This answer is automatically generated

0

Related Manuals for GreenWorks CSE402

Summary of Contents for GreenWorks CSE402

  • Page 1 CSE402 50mm 50mm...
  • Page 2 CSE402...
  • Page 3 CHAINSAW OPERATOR MANUAL CHAINSAW MANUEL D'UTILISATION SIERRA DE CADENA MANUAL DEL OPERADOR CSE402...

  • Page 4: Table Of Contents

    English Description........2 11.2 Assemble the guide bar and the chain..6 11.3 Install the battery pack....... 6 Overview............ 2 11.4 Remove the battery pack......6 Introduction........2 12 Operation........6 Intended use..........2 12.1 Examine the chain lubrication....6 Residual risks..........2 12.2 Hold the machine........

  • Page 5: Description

    English DESCRIPTION RESIDUAL RISKS Even with the intended use of the power tool, there is OVERVIEW other risk which cannot be prevented. Figure 1-22 According to the type and construction of the power tool, the following potential hazards might happen: Guide bar cover 24 Danger zone Front handle...

  • Page 6: Power Tool Use And Care

    English • Use personal protection. Always wear eye • Use the power tool, accessories and tool bits etc. in protection. Protective products such as dust mask, accordance with these instructions, taking into non-skid safety shoes, hard hat or hearing account the working conditions and the work to be protection used appropriately will reduce personal Use of the power tool for operations performed.

  • Page 7: Prevent Operator Kickback

    English reduce personal injury from flying debris or Kickback is the result of tool misuse and/or incorrect accidental contact with the saw chain. operating procedures or conditions and can be avoided by taking proper precautions as given below: Operation of a •...

  • Page 8: Proposition 65

    English • Any chainsaw is potentially lethal if used Symbol Explanation inappropriately. It is strongly suggested that you Hold with both hands. seek professional training in the safety and use of this tool. PROPOSITION 65 DANGER! Be careful with kick- backs.

  • Page 9: Installation

    English 8. Make sure the chain tension pin hole on the guide At the end of their useful life, discard bar fits correctly with the bolt. batteries with a precaution for our envi- ronment. The battery contains material 9. Install the chain cover. that is dangerous to you and the envi- Adjust the chain tension.

  • Page 10: Hold The Machine

    English 1. Examine the lubricant level of the machine from the Recommendation that the first-time user should, as a oil indicator. minimum practice, cutting logs on a saw-horse or cradle. 2. Add the lubricant if it is necessary. Before you start to fell a tree, make sure that 12.2 HOLD THE MACHINE •...

  • Page 11: Limb A Tree

    English 12.7 LIMB A TREE CAUTION Do not use strong solvents or detergents on the plastic Figure 11. housing or components. Limbing is to remove the branches from a fallen tree. 1. Keep the larger lower branches to hold the log off WARNING the ground.

  • Page 12: Guide Bar Maintenance

    English 3. Sharpen the top plate, side plate and depth gauge NOTE with a flat file. The machine comes from the factory without bar and 4. File all the cutters to the specified angles and the chain lubricant. same length. 1.

  • Page 13: Troubleshooting

    English TROUBLESHOOTING Problem Possible cause Solution The motor runs Sharpen or re- Problem Possible cause Solution The chain is and the chain ro- place the saw blunt. The guide bar The chain is too Adjust the chain tates, but the chain.

  • Page 14: Technical Data

    English Greenworks hereby warranties this product, to the Problem Possible cause Solution original purchaser with proof of purchase, for a period of The motor runs, Release the trig- four (4) years against defects in materials, parts or The machine is...

  • Page 15: Exploded View

    EXPLODED VIEW Part No. Description Part No. Description 341202035 Side cover 341092035 Middle cover 31100590LB 339012028A Brake disc 31101590 Chain 329012028 Brake tension spring 341182031E Scabbard 339022028 Brake steel strip 341032035 Assiatant handle Greenworks Tools PO Box 1238 Mooresville, NC 28115...

Table of Contents