Table of Contents
Advertisement
External Equipment V
External Equipment V
Watching VCR
(When the Interface board is installed.)
- When connecting the set with external equipments, match the colours of connecting ports (Video - yellow, Audio(L) - white,
Audio(R) -red).
- Connect the VIDEO INPUT socket(yellow) to the VIDEO INPUT socket of the set.
- If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the set.
- If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular
VCR to the Video input.
- Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.
Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR, 4:3
picture format or if a CH label is present; the fixed image may remain visible on the screen.
Use the orbiter function to avoid having a fixed image. (Refer to p.24)
1. Press INPUT button on the remote control and select
(If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.)
2. Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner's manual)
Watching Cable TV
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming.
This set cannot display TV programming without a TV tuner device or cable TV converter box connected to the set.
1. Press INPUT button on the remote control and select
2. Tune to cable service provided channels using the cable box.
Watching external AV source
- When connecting the set with external equipments, match the colours of connecting ports.
- Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.
1. Press INPUT button on the remote control of the set to select
2. Operate the corresponding external equipment. (See external equipment operating guide.)
Watching DVD
(When the Interface board is installed.)
How to connect
- Connect DVD video inputs to Y, P
INPUT) and audio inputs to Audio sockets of AUDIO INPUT.
- Or, connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
How to use
1. Press INPUT or MULTIMEDIA button on the remote control of the
set to select
Component
2. Try this after turning on the DVD player.
(Refer to the DVD player's manual for operating instructions.)
(When the Interface board is installed.)
(When the Interface board is installed.)
, P
of COMPONENT (DVD
B
R
or (
Component1
or
iewing Setups
iewing Setups
AV
,
S-Video
or (
AV1
AV
,
S-Video
or (
AV1
,
AV
S-Video
Component2
).
,
AV2
,
S-Video2
or
AV3
).
,
AV2
,
S-Video2
or
AV3
).
or (
,
,
or
AV1
AV2
S-Video2
• Component Input ports
You can get better picture quality if you con-
nect DVD player with component input ports
as below.
Component ports of the set
Video output ports
of DVD player
Installation
).
AV3
Y
P
P
B
R
Y
Pb
Pr
R-Y
Y
B-Y
Cr
Y
Cb
P
Y
P
R
B
Owner's Manual 11
Advertisement
Table of Contents
