Advertisement
Stand View
429.3
10
Unit: mm
100
100
18
247.9
INITIAL INSTALLATION
To attach the LCD monitor to your system, follow these instructions
1
Turn off the power of your computer.
2
For connecting the PC: Connect the DVI-D cables or DisplayPort cables to the connector of the display card
in your system. Tighten all screws.
3
Connect the DVI-D cables or DisplayPort cables to the connector on the back of the monitor.
4
Connect one end of the power cord to the monitor and the other end to the power outlet.
5
The AC switch on the back of the monitor must be turned on. Then turn on the monitor with the OSD
Control Knob.
6
For further adjustments, refer to the OSD section of this manual.
NOTE
•
Incorrect cable connections may result in irregular operation, damage display quality / components of LCD
module and/or shorten the module' s life.
•
Please refer to Caution of "Assembly And Preparing" section for proper selection of your Power cord.
•
The AC switch is a real on/off switch. If this switch is on the Off position, the monitor cannot be turned on by
using the OSD Control Knob.
•
If you have any questions, please refer to the " Troubleshooting" section of this manual.
Advertisement
