TANDBERG N3 User Manual page 43

Configuration commands
xConfiguration HTTPS Mode: <On/Off>
xConfiguration IP Address: <IPAddr>
xConfiguration IP Gateway: <IPAddr>
xConfiguration IP SubnetMask: <IPAddr>
xConfiguration LDAP Encryption:
<Off/TLS>
xConfiguration LDAP Password:
<password>
xConfiguration LDAP Server Address:
<IPAddr>
xConfiguration LDAP Server Port:
<1..65534>
xConfiguration LDAP UserDN: <userdn>
xConfiguration Links Link [1..100]
Name: <linkname>
xConfiguration Links Link [1..100]
Node1 Name: <nodename>
xConfiguration Links Link [1..100]
Node2 Name: <nodename>
xConfiguration Links Link [1..100]
Pipe1 Name: <pipename>
xConfiguration Links Link [1..100]
Pipe2 Name: <pipename>
xConfiguration Links TraversalLink
Pipe1 Name: <pipename>
xConfiguration Links TraversalLink
Pipe2 Name: <pipename>
xConfiguration NTP Address: <IPAddr>
xConfiguration Option [1..64] Key:
<optionkey>
Description
Enables/disables HTTPS support. Note that HTTP must also
be enabled.
You must restart the system for changes to take effect.
Specify the IP address of the system.
You must restart the system for changes to take effect.
Specify the IP gateway of the system.
You must restart the system for changes to take effect.
Specify the IP subnet mask of the system.
You must restart the system for changes to take effect.
Sets the encryption mode to be used on the connection to the
LDAP server.
The default is Off.
Sets the password to be used when binding to the LDAP
server.
Sets the IP address of the LDAP server to be used when
making LDAP queries.
Sets the IP port of the LDAP server to be used when making
LDAP queries.
Sets the user DN to be used when binding to the LDAP server.
Specifies the name of a link in the list of links.
Specifes the first node of a link.
A node name may be either a Zone name or a SubZone name.
Specifes the second node of a link.
A node name may be either a Zone name or a SubZone name.
First pipe associated with a link.
Second pipe associated with a link.
First pipe associated with the traversal link.
Second pipe associated with the traversal link.
Sets the IP address of the NTP server to be used when
synchronizing system time.
Specify the option key of your software options.
The following command
xstatus system software configuration
can be used to query the existing options enabled.
You must restart the system for changes to take effect.
37