Advertisement
7. Place the CHANNEL 1/2 and 3/4 Digital Input
Selector Switches to the "D1" Position.
8. Place the CHANNEL 5/6 and 7/8 Digital Input
Selector Switches to the "D2" Position.
9. Place the CHANNEL 1/2, 3/4, 5/6 and 7/8 Mode
Switches in the "MONO" Position.
This McIntosh MI128 Power Amplifier is designed
for Loudspeakers with an impedance of 4 ohms or
8 ohms. Connect a single Loudspeaker only to each
Channel Output Terminals.
10. With the Loudspeaker Hookup Cable attached to
the Loudspeaker Connection Plug, insert the Plug
End into the correct MI128 Rear Panel Chassis
Loudspeaker Socket. Then connect the opposite
end of the Loudspeaker Hookup Cable to the
Loudspeaker Connection Terminals. Make sure to
match up the MI128 Negative and Positive Output
Connection on the Plug Connector, with the Loud-
speaker Negative and Positive Input Connections.
WARNING: Loudspeaker terminals are hazard-
ous live and present a risk of electric
shock. For additional instruction on
making Loudspeaker Connections
contact your McIntosh Dealer or
McIntosh Technical Support.
11. After all the connections have been completed,
connect the MI128 power cord to an active AC
outlet.
How to Connect for Eight Zones
11
Advertisement
