Introduction; Intended Use; Package Contents - Silvercrest SSM 300 B1 User Manual And Service Information

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
SilverCrest SSM 300 B1

1. Introduction

Thank you for choosing a SilverCrest product. These Operating Instructions contain important instructions on
safety, operation and disposal of the device. Before using the device, read all the operating and safety
instructions and only use the device as described in the instructions.

2. Intended use

This stick blender is a household appliance and must be used exclusively for chopping and puréeing various
boneless foodstuffs. It may not be used outdoors or in tropical climates. The stick blender has not been
designed for corporate or commercial applications. Use the stick blender in domestic environments for
private applications only. Any other use does not correspond to the intended use. This stick blender fulfils all
relevant norms and standards relating to CE conformity. In the event of any modification to the stick blender
that was not approved by the manufacturer, compliance with these standards is no longer guaranteed. The
manufacturer shall not be liable for any damage or malfunctions resulting from such modifications.
Observe the regulations and laws in the country of use.

3. Package contents

Remove the stick blender and all the accessories from the packaging. Remove the packaging material and
check that all components are complete and undamaged. If you find anything missing or damaged, please
contact the manufacturer.
Motor unit with power cable and plug
Purée attachment with blades
These operating instructions
These operating instructions have a fold-out cover. On the inside of the cover is a diagram of the SilverCrest
SSM 300 B1 stick blender with all its control elements numbered. You can keep this page folded out whilst
reading the different chapters of these operating instructions. This allows you to refer to the relevant controls
at any time. The meanings of the numbers are as follows:
1
On button (normal speed)
2
On button (TURBO speed)
3
Motor unit
4
Purée attachment
16 - English

Advertisement

Table of Contents
loading

Table of Contents