Advanced Menu - Siemens SIMATIC Panel PC 870 Equipment Manual

Configuring the Computing Unit in BIOS Setup
5.3

Advanced Menu

Menu structure
Main
Setting items on this menu to incorrect values may
cause your system to malfunction
COM/LPT Configuration
PCI Configuration
Installed O/S:
Reset Configuration Data:
Floppy disk controller:
Large Disk Access Mode:
Local Bus IDE adapter:
Memory Gap at 15 Mbyte:
Default Primary Video Adapter
F1 Help
ESC Exit
Figure 5-8
Settings in the Advanced menu
Installed O/S
Reset
Configuration Data
Floppy disk
controller
5-12
PhoenixBIOS Setup Utility
Security Power
Advanced
Setup Warning
[Other]
[No]
[Enabled]
[DOS]
[Primary & Secondary]
[Disabled]
[AGP]
Select Item + / – Change Values
Select Menu Enter Select
"Advanced" Menu
Plug and Play means that all modules are automatically detected and
installed, providing they support the Plug and Play functionality.
[OTHER]
[Win95]
[Win98]
[WinMe]
[Win2000]
[Yes]
[Enabled]
[Disabled]
SIMATIC Panel PC 870 Computing Unit, Equipment Manual
Boot Sequence Version
Item Specific Help
Select the operating system
installed on your system which
you will use most commonly.
Note: An incorrect setting can
cause some operating systems
to display unexpected behavior.
F9 Setup Defaults
Sub-Menu F10 Save and Exit
The BIOS assumes the entire Plug and Play
capability, default setting
The BIOS assumes the entire Plug and Play
capability, default setting
The operating system handles some of the
Plug&Play functions
The operating system handles some of the
Plug&Play functions
The operating system handles some of the
Plug&Play functions
means that all previous Plug and Play
installations will be deleted and
the configuration will be triggered again
when the system is reloaded. The entry is then set
to [No] again.
System components which are not Plug and Play
capable must be entered by manually.
The floppy disk controller is enabled.
The floppy disk controller is disabled.
Release 11/02
Exit