Siemens SIMATIC Panel PC 870 Equipment Manual page 62

Configuring the Computing Unit in BIOS Setup
System time and system date Time and date
System Time and System Date indicate the current values. Once you have
selected the appropriate option, you can use the [+] and [–] keys to modify the
time setting
Hour:Minute:Second and the date
Month/Day/Year.
You can move between the entries in the date and time options (for example, from
hour to minute) using the Tabulator key.
Diskette A floppy disk drive
Set the type of floppy disk drive installed in the PC here. The following entries
are possible:
[Disabled]
[ 1.44 MB, 31/2" ]
Primary master primary slave secondary master/ secondary slave
The system jumps to the following submenu when you select this type of menu
field:
Main
Primary Master [4326MB]
Type:
Total Sectors
Maximum Capacity
Multi-Sector Transfers:
LBA Mode Control:
32 Bit I/O:
Transfer Mode:
Ultra DMA Mode:
F1 Help
ESC Exit
Figure 5-3
5-6
If no floppy disk drive is installed.
Default setting for an installed disk drive A
PhoenixBIOS Setup Utility
[Auto]
LBA Format
[40031712]
6495 MB
[16 Sectors]
[Enabled]
[Enabled]
[FPIO 4 / DMA 2]
[Mode2]
Select Item + / – Change Values
Select Menu Enter Select
Primary Master
SIMATIC Panel PC 870 Computing Unit, Equipment Manual
Item Specific Help
[AUTO] (recommended)
Autotypes installed
IDE-devices
[USER]
Enter parameters of
IDE-devices installed
at this connection
F9 Setup Defaults
Sub-Menu F10 Save and Exit
Release 11/02