System Configuration - TANDBERG 7000 MXP User Manual

2.4 System Configuration

The system must be configured for each installation. Configuration settings can be made via the
system menu. If an external IMUX or non-standard network is being used it may be necessary to
configure any associated external equipment.
Navigate through the menu system using the arrow keys and OK. Remember to press the Save
button on the bottom of each menu to save the changes. Press Cancel (x) to return to the
previous Menu. See General Use
remote control.
General configuration:
1. Open the General Settings menu
Press OK/Menu to open the Menu, if not already displayed. Select Control Panel -
General to open the General Settings menu.
2. Language
Press OK in the Language field and select the desired language from the list.
3. System Name / International Name*
Enter a name in the System Name field using the number keys on the remote control,
in the same way as with a mobile or cellular phone. Hold down the # key for one
second to switch back and forth from numbers to alpha characters.
4. Auto Answer, Phone Book Settings, External Services Settings and
Permissions
These settings may be left unchanged if no special needs are required. See chapter
General Settings
for more information about how to use the menus and the
for more information.
Installation
17