Table of Contents
Advertisement
TANDBERG 7000 MXP
Supported DVI cables:
TANDBERG supports DVI-D Single-Link, DVI-A and DVI-I Single-Link format cables.
DVI-D cables transmit digital T.M.D.S. signals, DVI-A cables transmit analog VGA signals and
DVI-I cables can transmit either digital or analog signals.
It is possible to extend existing DVI cables by the use of extension cables. The maximum cable
length however, is 5 meters. Going beyond that may result in quality loss.
Pin
Signal
Assignment
1
T.M.D.S.
Data2-
2
T.M.D.S.
Data2+
3
T.M.D.S.
Data2/4 Shield
4
T.M.D.S.
Data4-
5
T.M.D.S.
Data4+
6
DDC Clock
7
DDC Data
8
Analog Vertical
Sync
C1
Analog Red
C4
Analog
Horizontal
Sync
DVI-I - Combined Analog and Digital Connector Pin Assignments.
The TANDBERG Profile systems are shipped with a PC cable with integrated audio:
DVI-A Plug + 2*RCA Plug to VGA Plug + 3.5mm Stereo Plug, length 5m.
222
Pin
Signal
Assignment
9
T.M.D.S.
Data1-
10
T.M.D.S.
Data1+
11
T.M.D.S.
Data1/3 Shield
12
T.M.D.S.
Data3-
13
T.M.D.S.
Data3+
14
+5V Power
15
Ground (return
for +5V, HSync
and VSync)
16
Hot Plug Detect
C2
Analog Green
C5
Analog Ground
(analog, R, G &
B return)
Pin
Signal
Assignment
17
T.M.D.S. Data0-
18
T.M.D.S. Data0+
19
T.M.D.S.
Data0/5 Shield
20
T.M.D.S. Data5-
21
T.M.D.S. Data5+
22
T.M.D.S. Clock
Shield
23
T.M.D.S. Clock+
24
T.M.D.S. Clock-
C3
Analog Blue
Advertisement
Table of Contents
