4 Assembly [specialist]
4 Assembly [specialist]
Assembly positions:
The hydraulic separator can be installed under an individual heating circuit.
The hydraulic separator can be installed separately in the pipe.
In this case, additional accessories are needed:
for DN 25: 2 connection sets, PAW item no. 2151
for DN 32: 2 connection sets, PAW item no. 2152
The hydraulic separator can be installed under a distribution manifold (see figure below).
In this case, additional accessories are needed:
for DN 25: 1 mounting plate, PAW item no. 3425
for DN 32: 1 mounting plate, PAW item no. 3725
The hydraulic separator can also be installed vertically.
2017/01
993x4203-mub-ml – V01
B-5