MULTIBAND AMPLIFIER (REF. 7781 – 7784 - 7785)
1.3.
Mounting the Multiband Amplifier
•
Important: Mount the module vertically to a wall in a
well-ventilated room and leave a minimum space of 15 cm
around the product to guarantee a maximum ventilation of
the product
•
Connect an earth wire to the grounding clamp
•
Connect the input(s)
•
Connect a coaxial cable to the output connector for
distribution of the signal
•
Connect the power adapter cord to the power supply socket. Check the status LED for
the indication of DC power presence
•
Connect a network analyser to the -30 dB port to control the signal quality
•
Configure the Multiband Amplifier using the switches and rotary switches
•
The power adapter can easily be replaced without disconnecting the product. To do so,
open the top left plastic cover by pushing the click at the opposite side of the mains
connector
4