Maintenance; Cleaning And Disinfection Of The Instrument; Housing And Touchscreen; Cuvette Holder - EKF Diagnostics Stanbio HemoPoint H2 User Manual

Maintenance

6. Maintenance
6.1
6.1.1
It is essential to follow the instructions in Section 1.3 "Safety
notes". Disconnect the power adaptor from the electrical
connection before proceeding.
WARNING!
Cleaning the housing and touchscreen is best accomplished with
a lint-free cloth, lightly dampened with clean water. For more
stubborn soiling, a mild soap solution may be used. For
disinfection, standard solutions can be used for surface
disinfection provided they do not contain alcohol or other solvent.
The housing is equipped with a high-quality lacquered surface.
Please do not use any harsh cleaning agent or solvent otherwise
the surface can be damaged and the analyzer will look unsightly.
WARNING!
Before cleaning the touchscreen, open the cuvette holder.
TIP
6.1.2
The cuvette holder can be removed from the instrument for
cleaning. Proceed as follows:
•
•
•
48

Cleaning and disinfection of the instrument

Housing and touchscreen

Cuvette holder

Disconnect the power adaptor from the electrical
connection before proceeding.
Open the cuvette holder until you feel a resistance and
the holder will not extend further.
Press down the silver pin on the left-hand side (bottom)
of the cuvette holder with a ball-point pen and draw the
cuvette holder forward at the same time.
HemoPoint H2 User Manual
®