Printing Out Results; Deleting The Stored Test Data - EKF Diagnostics Stanbio HemoPoint H2 User Manual

Further functions
If the estimated Hematocrit mode has been activated the
hematocrit result will be displayed as well (see Section 5.3.8.1
"Hematocrit mode").
5.2.2
In order to print out from memory (data storage) you must have a
printer connected. Instructions for this can be found in Section 5.4
"Standard print mode" and Section 5.5 "Expanded print mode".
You can print out results as follows:
•
•
•
Printing out the results can take a few seconds. Following
printing, the analyzer changes back again to display the memory
(data storage).
TIP
5.2.3
With this function the entire data storage (all results) is deleted.
To delete the data storage, proceed as follows:
•
•
34

Printing out results

From the memory (data storage) display, press the button
O p t io n s
.
Select the entry "Print" using the buttons.
Confirm the selection with
results, otherwise press
print.

Deleting the stored test data

From the memory (data storage) display, press the button
O p t io n s
Select the entry "Delete" using the buttons.
HemoPoint
O K
ES C
.
H2 User Manual
®
, to print out the
, in order not to