Before Starting Installation - Canature HT765TO-75 Owner's Manual

5
How Your Filter Works
Backwashing of the filter takes place during the night while you sleep. First, backwashing
cleans the filter bed, then a rapid rinse clears any remaining particulates from the water. All
functions are performed automatically.
Your automatic filter can be set to operate according to your needs by programming the ap-
propriate settings. On the days your filter regenerates, the operating cycles will be auto-
matically performed. In the service position, filtered water is supplied for household use.
This valve is controlled with simple, user-friendly electronics displayed on a LCD screen.
The main page displays the current time and the remaining gallons in meter mode or the
remaining days in calendar clock mode.
Tools, Pipe, and Fittings, Other Materials
Pliers

Screwdriver

Teflon tape

Razor knife

Two adjustable wrenches

Additional tools may be required if modifi-

cation to home plumbing is required.
Plastic inlet and outlet fittings are included


Before Starting Installation

with the filter. To maintain full valve flow,
3/4" or 1" pipes to and from the filter fit-
tings are recommended. You should main-
tain the same, or larger, pipe size as the
water supply pipe, up to the softener inlet
and outlet.