Table of Contents
Advertisement
5.3 ADAPTERS
GENIUS LED 100
Fig. 6
HINWEIS:
Remove the connectors of the plastic adapters completely (Fig. 6) before using one of the included adapters! For Dan-
foss RA/RAV, use the enclosed screw and nut.
For the following valves no adapter is required:
Heimeier; Junkers Landys+Gyr; MNG; Honeywell; Braukmann, as these have a thread of M30 x 1,5 mm. The adapters
for Danfoss RAV (pin must be plugged on the valve tappet) Danfoss RA and Danfoss RAVL are included.
For the following valves you need an adapter:
Herz M28 x 1,5 mm; Comap M28 x 1,5 mm; Vaillant 30,5 mm; Oventrop M30 x 1,0 mm; Meges M38 x 1,5 mm; Ondal
M38 x 1,5 mm; Giacomini 22,6 mm; Rossweiner M33 x 2,0 mm; Markaryd M28 x 1,0 mm; Ista M32 x 1,0 mm; Vama
M28 x 1,0 mm; Pettinaroli M28 x 1,5 mm; T+A M28 x 1,5 mm; Gampper 1/2/6; Danfoss RA/RAV/RAVL.
For additional adapters, please visit: http:/ /shop.eurotronic.org
If you are not sure which valve you have, please visit: www.eurotronic.org/produkte/faq/ and check the adapter list.
RAV Pin
RAV
RA
RAVL
Page 9
Advertisement
Table of Contents
