Table of Contents
Advertisement
5.2 INSTALLATION AT THE RADIATOR
GENIUS LED 100
GENIUS LED 100 can easily be mounted on all known valve bodies (see adapter list at: https:/ /eurotronic.org/service/
faq).
1. Unscrew the old thermostatic head completely, loosen the fastening and pull it off the valve (Fig. 3)
2. If necessary, select a suitable adapter and mount it on the valve (Fig. 4)
3. Screw the thermostat onto the valve or adapter by turning the union nut clockwise (Fig.5).
CAUTION:
Make sure that the device is in the installation mode even if it is installed/removed later.
Only assemble/disassemble in this position.
Page 8
Advertisement
Table of Contents
