Main Functions; Temperature Setting; Self-Learning-Function - Eurotronic GENIUS LED100 Installation & Operation Manual

6. MAIN FUNCTIONS

GENIUS LED 100

6.1 TEMPERATURE SETTING

The temperature can be set as desired using the PLUS and MINUS buttons. The temperature is always increased or
decreased in 1.5° steps.
EIN

6.2 SELF-LEARNING-FUNCTION

To start the self-learning function (running time 24 hours), select the menu item Self-learning function
To do this, use PLUS and MINUS to navigate through the menu until the Self-learning function LED
confirm with OK/SET. The thermostat then goes into normal operation and displays the temperature via the LEDs. All
temperature changes that you make on the thermostat in the next 24 hours are now stored. After the 24 hours have
elapsed, heating is now carried out every day according to the same stored scheme.
Page 11
All 6 LEDs on > 28° = heating ON (valve fully open, no regulation)
LED 1 to 5 on, 6 flashes: 28°
LED 1 to 5 an: 26,5 °
LED 1 to 4 an, 5 flashes: 25°
LED 1 to 4 an: 23,5°
LED 1 to 3 an, 4 flashes: 22°
LED 1 to 3 an: 20,5°
LED 1 to 2 an, 3 flashes: 19°
LED 1 to 2 an: 17,5°
LED 1 to, 2 flashes: 16°
LED 1 to: 14,5
LED 1 flashes: 13°
no LED on: < 8° = heating OFF (anti-freeze function active)
in the MENU.
lights up. Now