Table of Contents
Advertisement
6.3 FAST-LINK-TECHNOLOGY
GENIUS LED 100
With Fast-Link technology and our app, you can quickly and easily make settings on your controller and create heating
profiles using your smartphone. Using Fast-Link technology, the settings are then transmitted to the controller simply
by holding the smartphone on to it.
To use Fast-Link you need the Eurotronic GENIUS App. Download the free „Eurotronic GENIUS" application from the
Apple App Store (iOS) or Google Play Store (Android) to your smartphone or tablet.
NOTE:
To ensure trouble-free transmission, set the brightness of your display to the highest level. No energy-saving
mode or similar must be activated.
1. Remove the battery cover (Fig.9).
2. Press the MENU button on your controller. Use PLUS/MINUS to navigate through the menu until the Fast-Link LED
lights up. Confirm with OK/SET.
3. Press the „Transmit settings" button in the app and hold your smartphone close to the device as shown in Fig.10.
Fast-Link-transmission was successful.
Fast-Link-LED
lights up for 3 seconds to confirm.
Fast-Link-transmission was not successful.
Fast-Link-LED
flashes at increased frequency (4 Hz).
NOTE:
Both devices, the smartphone and the device, need to be set to
FAST-LINK Mode.
Page 12
Advertisement
Table of Contents
