Dvd Self Diagnostic Function-Error Code; Service Mode Table 1 - Panasonic DVD-LS80EE Service Manual

DVD-LS80EE / DVD-LS80GN / DVD-LS80GCS / DVD-LS82EE
9.3.

Service Mode Table 1

The service modes can be activated by pressing various button combination on the player and remote control unit.
Player buttons Remote control unit buttons
PAUSE
+
PLAY
PAUSE
BWD-SKIP
PLAY
9.4.

DVD Self Diagnostic Function-Error Code

<Displayed during normal operations>
Error Code Error Content
U, H error
U11 Focus error
U15 DVD-R not finalized
H01 Tray loading error
H02 Spindle servo error
H03 Traverse servo error
H04 Tracking servo error
H05 Seek error
H06 Power error
H07 Spindle
error
DSC related
F500 DSC error
F501 DSC not Ready
F502 DSC Time out error
F503 DSC communication
Failure
F505 DSC Attention error
F506 Invalid media
ODC related
F600 Access
management
information caused by
demodulation error
F601 Indeterminate sector ID
requested
F602 Access failure to LEAD-
IN caused
demodulation error
F603 Access
KEYDET
demodulation error
F610 ODC abnormality
F611 6626 QCODE
read Error
0 Displaying the UHF display F_ _ _
5 Jitter check, tilt adjustment
*Display shows xx_yyyzz
"xx" and "zz" shown to the right have nothing to do with the jitter
value. "xx" is the error counter, while "zz" is the focus drive value.
Refer to section 12.4.1. for Optical pick gate adjustment.
6 Checking the region numbers and broadcast system
7 Checking the program version
9 Lighting Confirmation Function of Display Tube
DISPLAY Checking the laser drive current
PAUSE Writing the laser drive current value after replacing the optical
pickup (do not use for anything other than optical pickup
replacement)
The user setting is returned to the state of the factory shipment.
—
Additional error explanation
(Spindle servo, DSC SP motor, CLV servo error)
Cannot switch off the power because of the panel
and system computer communication error
motor drive
DSC stops in the occurrence of servo error
(startup, focus error, etc)
DSC-system computer
(Communication failure caused by idling of DSC)
Similar disposal as F500
Communication
although communication command was sent)
Similar disposal as F500
Disc is flipped
incompatible disc
failure to Operation stopped because navigation data is not
accessible caused by the demodulation defect
Operation stopped caused by the request to
access abnormal ID data
LEAD IN data unreadable
by
failure to Access failure to CSS data of disc
caused by
No permission for command execution
don't Access failure to seek address in CD series
Application
communication error
error (result error occurred
over, TOC unreadable,
24
Refer to section 9.4. DVD
Self Diagnostic Function-
Error
Display).
Refer to section 12.4.
Optical adjustment .
Check the IC3008 FLASH
ROM program.
Refer
Optical pick-up unit.
Defect 1 Defect 2 Defect 3
OPU DV 5.0 DV 5.0
(IC3001) (IC3001)
DV 5.0 DV 5.0
(IC3001) (IC3001)
OPU DV 5.0 DV 5.0
(IC3001) (IC3001)
DV 5.0 DV 5.0 EEPROM
(IC3001) (IC3001) (IC3002)
OPU DV 5.0 DV 5.0
(IC3001) (IC3001)
DISC DV 5.0 DV 5.0
(IC3001) (IC3001)
DV 5.0 DV 5.0 DV 5.0
(IC3001) (IC3001) (IC3001)
DV 5.0 DV 5.0 DV 5.0
(IC3001) (IC3001) (IC3001)
DV 5.0
(IC3001)
DV 5.0
(IC3001)
Note
Code (UHF
to section 8.5.
Defect 4
servo drive
servo drive
servo drive
DV 5.0
(IC3001)