I Want To Change My Wireless Network Password; Reset Your Symfonisk Speaker - IKEA SYMFONISK Manual

I want to change my wireless network password

If your Sonos system is set up wirelessly and you change your wireless
network password, you will also need to change it on your Sonos system.
1. Temporarily connect one of your SYMFONISK speakers to your router
with an Ethernet cable.
2. Choose one of the following:
Using the Sonos app on a mobile device, go to More -> Settings
-> Advanced Settings -> Wireless Setup.
Using the Sonos app on a PC, go to Settings -> Advanced from the
Manage menu. On the General tab, select Wireless Setup.
Using the Sonos app on a Mac, go to Preferences -> Advanced from
the Sonos menu. On the General tab, select Wireless Setup.
3. Enter the new wireless network password when prompted.
4. Once the password is accepted, you can unplug the speaker from your
router and move it back to its original location.

Reset your SYMFONISK speaker

This process will delete registration information, content saved to My
Sonos, and music services from your SYMFONISK speaker. This is
commonly done before transferring ownership to another person.
Your Sonos app may also recommend that you go through this process
if it can't find your product during setup. If you wish to erase data from
multiple SYMFONISK speakers, you will need to perform these steps on
each of them.
Resetting all products within your system will permanently delete your
system's data. It cannot be restored.
1. Unplug the power cord.
2. Press and hold the
power cord.
3. Continue holding the button until the light flashes orange and white.
4. The light will flash green when the process is complete and the product
is ready to be set up.
Play/Pause button while you reconnect the
15