Advertisement
Available languages
Available languages
To re-charge using the adapter
1. Plug the adapter cord connector into the receptacle (9) on the front panel.
2. Put the charging-adaptor (15) into a 230 V~ outlet.
3. Allow the Jump Start System to recharge about 12 hours. Check the re-charge progress by
pressing the red button (11).
4. When the LED (10) flashes green, the quick start system is sufficiently charged.
To recharge using a 12 VDC supply:
Note: Recharging with this method will not recharge the system to the same 14 to 15
VDC voltage level, as when using the AC-adapter.
Insert the cigarette lighter recharger cord plug (16) into the cigarette lighter receptacle on the
1.
boat or vehicle.
Insert the other end of the cigarette lighter recharger cord (small plug) into the receptacle (9)
2.
on the front panel of the unit.
You should only charge the energy station when en route, as otherwise the unit will run
3.
down the vehicleʼs battery.
Battery disposal
After the battery in the jump start system has expired, it must be recycled. Some countries
requires this recycling. Contact the local solid waste authority for recycling information.
Caution: Do not dispose of battery by fire. This could result in explosion.
Before disposing of battery, cover exposed terminals with heavy duty insulation
tape to prevent short-circuit.
2 years warranty
The warranty for this tool starts at the date of purchase. Please provide your purchase bill as
proof.
This warranty includes:
repair of operational failures
replacement of faulty parts
qualified service and installation
provided that the failure does not result of wrong handling.
Please do not hesitate to contact us for any further queries:
Brüder Mannesmann Werkzeuge GmbH
Abt. Reparatur - Service
Lempstrasse 24
D-42859 Remscheid / Germany
phone:
+49 2191 / 37 14 71
fax:
+49 2191 / 38 64 77
e-mail:
service@br-mannesmann.de
.
GB - 11
Advertisement
