Channel Configuration - HANYOUNG NUX GR200 Series User Manual

4. Channel configuration

▶ Basic configuration
Fig. 36) Basic configuration : RTD, TC
The channel configuration and the alarm configuration are initialized if the sensor type, range and
display unit change for the thermoresistor and the thermocouple. Change the sensor type and
the range to initialize the channel configuration and the alarm configuration for the VDC sensor.
Caution
24
Fig. 37) Basic configuration : DCV
Select the channel.
Enter the value of the range to use.
It may not be changed during recording.
Select the sensor type.
It may not be changed during recording.
Enter the input digital filter.
The decimal point location is fixed if the sensor
is the thermoresistor or the thermocouple.
Configure °C or °F.
It may not be changed during recording.
Configure the VDC input value if the
sensor is VDC.
It may not be changed during recording.
Configure the decimal point location if the
sensor is VDC. It may not be changed during
recording.
Configure the display unit. (°C, °F, Ω, V, ㎷,
%, user) Select the user to directly enter the
character. It may not be changed during
recording.