Digital Screen - HANYOUNG NUX GR200 Series User Manual

[ Display the error on the trend screen ]
Errors occurred
I/O connection error
Input connection error
AD error
Correction error
Calculation error
User BURN OUT error
BURN OUT error
RJC error
Out of the measurement range (-5 ~ 0 %, 100 ~ 105 %) Alternatively display "----" and the measured value

5. Digital screen

It is the screen which displays the channel measurement with numbers.
Fig. 23) Digital screen
1 2 3
4
5
[ Display the error on the digital screen ]
Errors occurred
I/O connection error
Input connection error
AD error
Correction error
Calculation error
User BURN OUT error
BURN OUT error
RJC error
Out of the measurement range (-5 ~ 0 %, 100 ~ 105%) Display the measured value and "OVER" blinks
"I/O CONNECTION ERROR" blinks on the screen name
Display "----"
Display "----"
Display "----"
Display "----"
Display "----"
Display "----"
Alternatively display "RJC" and the measured value
1
Display the channel number.
2 Display the channel name. The channel name may be edited in the "Channel configuration
3
Display the channel unit. The displayed unit may be configured in the "Channel configuration
4
Display the measured value.
5
Check the measurement level within the display range as the grid.
Display
Go to the menu screen.
Go to the bar graph screen.
Display the error from the channel.
The character appears when the alarm is
activated. The alarm types may be configured
in "Alarm and DI
Display
"I/O CONNECTION ERROR" blinks on the screen name
"----" displays and "CONNECT ERR" blinks
"----" displays and "ADC" blinks
"----" displays and "CAL" blinks
"----" displays and "CALC" blinks
"----" displays and "USER BOUT" blinks
"----" displays and "BOUT" blinks
The measured value displays and "RJC" blinks
".
".
".
17