Features; Assembly - Breville Smart Air Plus Instruction Book

Features

YOUR BREVILLE AIR PURIFIER
Your Breville Smart Air Plus
improves your indoor air quality using
4 distinct levels of protection.
1. A Pre-Filter
Captures larger airborne particles such as
human hair, pet dander and dust particles.
2. A True HEPA Filter
Traps up to 99.97% of allergens and
airborne contaminants down to 0.3 microns
in size. These include dust, mould spores,
plant spores, and pollen.
3. An Activated Carbon Membrane
Along with assisting in the capture of
dust, smoke, pollen and other airborne
allergens, the activated carbon membrane
helps to neutralise odours in the home and
to eliminate fumes emitted by household
products as well as other volatile organic
compounds (VOC's) that might be found
in the air.
4. Microbe Shield Technology
TM
Microbe Shied technology uses a shortwave
UV-C light specially designed to target
germs and bacteria from the incoming air
as it passes through the air purifier before
releasing the air back into the surrounding
area. The Microbe Shield
turned on and off according to preference.
8
BEFORE FIRST USE
• Remove and safely discard any packaging
Purifier
TM
• Remove the filter from the air purifier
• Select a flat and level location for the air
• For proper air flow, locate the unit at least
• Ensure the air inlet and outlets are not
• Ensure the filter has been fitted correctly
• Plug the power plug into a 230V OR 240V
When moving the air purifier, always lift
the unit using two hands and set down
gently on a flat and level surface.
function can be
TM

Assembly

material or promotional labels attached to
your air purifier and filter.
(see REPLACING THE FILTER on page 11)
and take it out of the plastic bag. Then
re-insert the filter into the air purifier.
purifier.
20cm from any wall or furniture.
blocked before use.
as per the instructions in this book.
power outlet and turn on the power outlet.
IMPORTANT