Features; Assembly - Breville LAP300 Instruction Book

Features

YOUR BREVILLE AIR PURIFIER
Your Breville Smart Air
your indoor air quality using 4 distinct levels
of protection.
1. A Pre-Filter
Captures larger airborne particles such as
human hair, pet dander and dust particles.
2. A True HEPA Filter
Traps up to 99.97% of allergens and
airborne contaminants down to 0.3 microns
in size. These include lung-damaging dust,
mould spores, plant spores, and pollen.
3. An Activated Carbon Membrane
Along with assisting in the capture of
dust, smoke, pollen and other airborne
allergens, the activated carbon membrane
helps to neutralise odours in the home and
to eliminate fumes emitted by household
products as well as other volatile organic
compounds (VOC's) that might be found
in the air.
4. Microbe Shield
Microbe Shield
shortwave UV-C light specially designed
to target germs and bacteria from the
incoming air as it passes through the air
purifier before releasing the air back into
the surrounding area. The Microbe Shield
function can be turned on and off according
to preference.
8
LAP300_ANZ_IB_C19.indd 8
Purifier improves
TM
Technology
TM
technology uses a
TM

Assembly

BEFORE FIRST USE
• Remove and safely discard any packaging
material or promotional labels attached to
your air purifier and filter.
• Remove the filter from the air purifier
(see REPLACING THE FILTER on page 11)
and take it out of the plastic bag. Then
re-insert the filter into the air purifier.
• Select a flat and level location for the
air purifier.
• For proper air flow, locate the unit at least
20cm from any wall or furniture.
• Ensure the air inlet and outlets are not
blocked before use.
• Plug the power plug into a 230V OR 240V
power outlet and turn on the power outlet.
IMPORTANT
When moving the air purifier, always lift the
unit using two hands and set down gently on
a flat and level surface.
TM
19/3/19 4:07 pm