Shutting Down The Projector - ViewSonic M1 mini User Manual

Shutting Down the Projector

1. Push the Power Switch on the projector or the Power button on the remote
control and the following confirmation message will appear:
Photo
2. Push the Power Switch or press the Power button on the remote control again to
turn off the projector. To cancel, press any other button on the remote control.
NOTE: When not in use, please push the Power Switch to Off. If only using the
Power button on the remote control to power off, the projector will
enter standby mode and the embedded battery will still consume some
power.
Press the Power Button Again to Power Off
Music Movie
22 22
HDMI Setting