Message Alerts; Screen Saver - Sony Ericsson M600I User Manual

automatically turn the backlight off to save
power. If you have set Backlight to
can still save power by selecting
. This will make the screen go blank
enabled
after a period of inactivity.
determines how long after you
Active after
stop using the phone the screen should go
blank.

Screen saver

Select
Tools > Control panel > Device >
to select a screen saver. You can
Screen saver
select the default screen saver, a picture or a
folder of pictures to be used as a slide show.
Sounds & alerts
Ringtones
Select
Tools > Control panel > Device >
Sounds & alerts > Ringtones
ringtones for incoming voice and data & fax
calls in the drop-down menus. Tap and drag
the volume slider, or rotate the Jog Dial, to
adjust the ringtone level. To preview a sound
tap . If you select
signal will start out low and gradually increase
in volume.
You can further personalize your phone by
assigning different ringtones to different
M600i
This is the Internet version of the user guide. © Print only for private use.
, you
On
Power save
to choose
the ring
Increasing ring
contacts, see Adding a personal ringtone to a
contact on page 31.

Message alerts

Select
Tools > Control panel > Device >
Sounds & alerts > Message alerts
sounds to be played when you get different
kinds of messages. If you select
, a dialog will be displayed on the
notification
screen when a message arrives.
Alarms
Select
Tools > Control panel > Device >
Sounds & alerts > Alarms
adjust the volume for calendar and clock
alarms. Alarms require that the phone is turned
on. If you want to hear alarms but not be
disturbed by incoming calls or messages, set
the phone in Flight mode.
Vibrating alerts
Select
Tools > Control panel > Device >
Sounds & alerts > Vibrating alerts
select for which events the phone should
vibrate.
On if silent
vibrate only when it has been set to silent
mode. For more information, see Silent mode
on page 20
to select
Display
to select sounds and
and then
means the phone will
Control panel 75