Message Alerts - Sony Ericsson M600i User Manual

determines the length of the
Active after
period of inactivity before turning off the
screen.
Screen saver
Select
Tools > Control panel > Device >
to select a screen saver. You can
Screen saver
select the default screen saver, an image, or a
folder of images for use as a slideshow.
Sounds & Alerts
Ringtones
Select
Tools > Control panel > Device >
Sounds & alerts > Ringtones
ringtones from the drop-down menus for
incoming voice and data & fax calls. Tap and
drag the volume slider or rotate the Jog Dial to
adjust the ringtone level. To preview a sound
tap . If you select
signal will begin at a low level, then gradually
increase in volume.
You can further customize your phone by
assigning different ringtones to different
contacts (see Adding a personal ringtone to a
contact on page 31).

Message alerts

Select
Tools > Control panel > Device >
Sounds & alerts > Message alerts
M600i
This is the Internet version of the user guide. © Print only for private use.
to choose
the ring
Increasing ring,
to choose
sounds to play when you receive different
kinds of messages. If you select
, a dialog will display on the
notification
screen when a message arrives.
Alarms
Select
Tools > Control panel > Device >
Sounds & alerts > Alarms
and adjust the volume of Calendar and Clock
alarms. Alarms require that the phone is turned
on. If you want to hear alarms, but not be
disturbed by incoming calls or messages, set
the phone to Flight mode.
Vibrating alerts
Select
Tools > Control panel > Device >
Sounds & alerts > Vibrating alerts
choose the events for which you want the
phone to vibrate.
On if silent
phone will vibrate only when the silent mode
has been activated. For more information, see
Silent mode on page 19
Buttons & screen
Select
Tools > Control panel > Device >
Sounds & alerts > Buttons & screen
choose sounds that play when you press keys
and buttons or tap the screen.
Display
to choose sounds
, then
indicates the
to
Control Panel 75