Internet Accounts; Mobile Networks - Sony Ericsson M600I User Manual

If you are pairing with a Bluetooth headset, the
headset may have auto pairing functionality.
This means you do not have to initiate pairing,
as the headset does so when switched on. It
also means you do not have to enter a
passcode, but you must still confirm the
pairing.
When you select a device from the list, a list of
options opens:
Device options
– select to change the name
Device name
of the device. This only affects how the
device is presented in your phone.
Trust this device
connect to your phone without your
confirmation every time.
Enable as audio
example, a Bluetooth headset) in audio
applications. Devices enabled for audio
are listed in the audio tab,
Bluetooth services
The services (sometimes called profiles)
supported by the connected device are listed in
the detail view for the device. On the
select the device and then select the right
tab.
Services
Audio tab
This is where all paired devices that are
marked
Enable as audio
later disable a device for audio to prevent your
M600i
This is the Internet version of the user guide. © Print only for private use.
– allows the device to
– to use the device (for
.
are listed. You can
phone from accidentally transferring sound to
it.
Infrared port
Select
Tools > Control panel > Connections >
to activate the infrared port.
Infrared
Infrared options
or
On On for 10 minutes
port on.
– switches the port off.
Off

Internet accounts

See Setting up Internet, email and MMS on
page 61.

Mobile networks

Select
Tools > Control panel > Connections >
Mobile networks
should choose an available network, when you
are outside your operator's coverage area.
Mobile networks
Preferred list
tab,
Search tab
The phone searches for a network. You can
choose between
– switches the
to set the way your phone
has two tabs,
Search
.
or
Automatic Manual
Control panel
and
search.
71