Bluetooth Wireless Technology - Sony Ericsson M600I User Manual

• – select the currency type (three
Currency
letter code).
To be saved, the settings must be followed by
the entry of a valid PIN 2 code, provided by
your network operator.
Note: The Call meter service does not work if
you have roamed to a network that does not
provide charging information.
Connections
The connection settings control how your
phone communicates with other devices.
Bluetooth wireless
technology
Select
Tools > Control panel > Connections >
to make the Bluetooth settings and
Bluetooth
connect to other Bluetooth devices.
Note: Only connect to trusted devices.
For all tasks, except for a single file transfer, it
is necessary to set up a permanent and trusted
relationship between your phone and the other
device. This is called pairing (or bonding).
Paired devices are remembered by your phone
so you do not need to pair with these again.
This simplifies future connections and makes
them secure, as paired devices have already
authenticated each other.
70 Control panel
This is the Internet version of the user guide. © Print only for private use.
Settings tab
This is where you make all the Bluetooth
settings of your phone.
My phone name
want to be displayed when your phone is
presented to other Bluetooth devices.
– activates Bluetooth.
Bluetooth on
Visible to other devices
possible for other Bluetooth devices to
find your phone.
Enable power saving
limiting the activity of your phone. Your
phone will no longer accept requests for
additional connections from other
Bluetooth devices after a Bluetooth
connection has been established, but it
will still be able to discover other
Bluetooth devices and request connections
to them.
Devices tab
This is where all devices that your phone has
already paired with are listed, even if they are
not within reach and Bluetooth-activated for
the moment.
Pairing with a device
Select to pair with a new device.
New device
The phone will then search for visible
Bluetooth devices within range. To pair with
one of the devices, select it in the list and enter
the passcode (also called passkey) if you are
asked to.
– enter the name you
– makes it
– saves power by
M600i