All manuals and user guides at all-guides.com 12. Damage Requiring Service — This product should be serviced CAUTION AVIS only by qualifi ed service personnel when: A. The power-supply cord or the plug has been damaged; or RISK OF ELECTRIC SHOCK B.
All manuals and user guides at all-guides.com Getting Started Placement The following steps will An Extremely Important LOOK help you set up your Note on S•5 Bass monitor speakers quickly. Response and Your CLOSER Follow these steps for all Control Room the S•5 studio monitors in Your new S•5s achieve their best bass your system.
All manuals and user guides at all-guides.com Introduction Thank you for choosing TAPCO S•5 Studio Monitors by Mackie Designs. The TAPCO product line hails back to the days of TAPCO Corporation, Greg Mackie’s fi rst company. TAPCO revolutionized the audio industry back in 1969 with the very fi rst 6-channel mixer specifi...
All manuals and user guides at all-guides.com Hookup Diagrams Stereo Speaker Hookup S-5 ACTIVE STUDIO MONITOR S-5 ACTIVE STUDIO MONITOR INPUTS SETTINGS INPUTS SETTINGS PHONO HIGH FREQ FILTER PHONO HIGH FREQ FILTER – – (NORMAL) (NORMAL) LOW FREQ FILTER LOW FREQ FILTER INPUT INPUT LEVEL...
All manuals and user guides at all-guides.com Get that sound level meter out. Decide what level The fuse is located behind the fuse cover, at the you’re going to mix at and use the meter to help keep bottom of the IEC socket. See the “Troubleshooting” you mixing at that section on page 11 level.
All amplifi ers produce heat. The S•5 is designed to speaker output and the S•5’s input. Your Mackie be effi cient both electrically and thermally. dealer may be able to help you fi nd one, or if you •...
All manuals and user guides at all-guides.com Appendix A: Service Information Warranty Service No Sound Details concerning Warranty Service are spelled • Is the power LED on the front panel illuminated? out in the Warranty section on page 15. • Is the INPUT LEVEL control turned up? If you think your TAPCO S•5 has a problem, please •...
Page 12
RA number, please let Tech Support The monitor must be packaged in its original know if you need new packaging. Mackie is not packing box, and must have the RA number on responsible for any damage that occurs due to the box.
All manuals and user guides at all-guides.com Appendix B: Connections XLR Connectors 1/4" TS Phone Plugs and Jacks XLR connectors are used to make balanced “TS” stands for Tip-Sleeve, the two connections connections to the S•5. They are wired as follows, available on a mono 1/4"...
All manuals and user guides at all-guides.com Appendix C: S•5 Specifi cations Acoustic Performance Equalization Free Field Frequency Response: Low Frequency EQ: +2 dB/+4 dB @ 65 Hz, peaking 64 Hz – 20 kHz (±3 dB) High Frequency EQ: ±2 dB @ 5 kHz, shelving Lower Cutoff Frequency: –3 dB @ 64 Hz AC Power Requirements...
All manuals and user guides at all-guides.com TAPCO LIMITED WARRANTY A. Mackie Designs Inc. warrants all materials, H. This is your sole warranty. Mackie Designs Inc. does workmanship and proper operation of this TAPCO not authorize any third party, including any dealer...
Page 16
All manuals and user guides at all-guides.com tapcogear.com...