Honda CB1000RA KO Manual page 145

20180306130515_32MKJ8001_eng_BOOK Page 145 Tuesday, March 06 2018 13:14:26 JST
Tyre Puncture Removing Wheels
u
Installation
To install the rear wheel, reverse the
1.
removal procedure.
Install the rear wheel and tighten the rear
2.
wheel nuts equally.
Torque: 108 N·m (11.0 kgf·m, 80 lbf·ft).
Turn the muffler counterclockwise until its
3.
original position.
Tighten the muffler band bolts.
4.
Torque: 22 N·m (2.2 kgf·m, 16 lbf·ft).
Install the step bracket bolt A.
5.
Tighten the right step bracket bolt A and
6.
B.
Torque: 37 N·m (3.8 kgf·m, 27 lbf·ft).
Install the muffler mount bolt, washer, and
7.
nut and tighten it.
Torque: 22 N·m (2.2 kgf·m, 16 lbf·ft).
142
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.