Overheating (High Coolant Temperature Indicator Is On) - Honda CB1000RA KO Manual

20180306130515_32MKJ8001_eng_BOOK Page 133 Tuesday, March 06 2018 13:14:26 JST

Overheating (High coolant temperature indicator is on)

The engine is overheating when the following
occurs:
High coolant temperature indicator
●
comes on.
Acceleration becomes sluggish.
●
If this occurs, pull safely to the side of the
road and perform the following
procedure.
Extended fast idling may cause the high
coolant temperature indicator to come on.
NOTICE
Continuing to ride with an overheated engine
can cause serious damage to the engine.
Stop the engine using the ignition switch,
1.
and then turn the ignition switch to the
(On) position.
130
Check that the radiator fan is operating,
2.
and then turn the ignition switch to the
(Off) position.
If the fan is not operating:
Suspect a fault. Do not start the engine.
Transport your motorcycle to your dealer.
If the fan is operating:
Allow the engine to cool with the ignition
switch in the (Off) position.
After the engine has cooled, inspect the
3.
radiator hose and check if there is a leak.
P. 107
2
If there is a leak:
Do not start the engine. Transport your
motorcycle to your dealer.
Check the coolant level in the reserve
4.
tank. P. 107
2
Add coolant as necessary.
u
If 1-4 check normal, you may continue
5.
riding, but closely monitor the high
coolant temperature indicator.