Honda CB1000RA KO Manual page 142

20180306130515_32MKJ8001_eng_BOOK Page 142 Tuesday, March 06 2018 13:14:26 JST
Installation
Attach the side collars to the wheel.
1.
On the right side, place the wheel
2.
between the fork legs and insert the
lightly greased front axle shaft to the end,
through the right fork leg and wheel hub.
Align the end of the front axle shaft with
3.
the surface of the fork leg.
Surface of
fork leg
End of front
axle shaft
Tighten the right axle pinch bolts to hold
4.
the axle.
Tyre Puncture
Install and tighten the axle bolt.
5.
Torque: 79 N·m (8.1 kgf·m, 58 lbf·ft)
Loosen the right axle pinch bolts.
6.
Tighten the left axle pinch bolts.
7.
Torque: 22 N·m (2.2 kgf·m, 16 lbf·ft).
Install the right brake caliper and tighten
8.
the mounting bolts.
Torque: 45 N·m (4.6 kgf·m, 33 lbf·ft).
Install the left brake caliper and tighten
9.
the mounting bolts.
Torque: 45 N·m (4.6 kgf·m, 33 lbf·ft).
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
Use new mounting bolts when
u
installing the brake caliper.
Removing Wheels
u
Continued
139