Table of Contents
Advertisement
Available languages
Available languages
10
www.electrolux.com
German de-
grees (°dH)
1) Factory setting.
2) Do not use salt at this level.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start to flash and the display is blank.
2. Press
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting: e.g.
3. Press
the setting.
4. Press the on/off button to confirm the
setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and level 6 (maximum quantity). Level 0
will deactivate the rinse aid dispenser and
no rinse aid will be released.
Factory setting: level 4.
How to set the rinse aid level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
French de-
grees (°fH)
<4
<7
and
,
,
.
,
continues to
= level 5.
again and again to change
and
mmol/l
<0.7
2. Press
until
,
and
,
and
3. Press
4. Press the on/off button to confirm the
6.4 Use of rinse aid and multi-
tablets
The factory setting of the rinse aid
dispenser is with the dispenser activated.
This means that the rinse aid dispenser
always releases rinse aid.
It is possible to deactivate the rinse aid
dispenser, in this case the dispenser will
not release rinse aid only if the option
Multitab is activated.
If the dispenser is deactivated and you do
not select the option Multitab, the
dispenser will release rinse aid.
The use of the option Multitab with the
rinse aid dispenser deactivated may not
give satisfying drying results.
When the rinse aid dispenser is
deactivated, the rinse aid indicator is
always off when the option Multitab is
activated.
until
Clarke de-
Water softener
grees
< 5
the indicators
,
start to flash and the display is blank.
.
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting: e.g.
= level 4.
– The levels of rinse aid are from
0A to 6A.
– Level 0 = no rinse aid is
released.
again and again to change
the setting.
setting.
level
2)
1
,
,
and
,
,
and
continues to
Advertisement
Chapters
Table of Contents
