Table of Contents
Advertisement
14
ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
(Depending on model)
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on or
y
y
hang on the TV.
NOTE
Use a platform or cabinet that is strong and
y
y
large enough to support the TV securely.
Brackets, bolts and ropes are optional. You
y
y
can obtain additional accessories from your
local dealer.
Tidying cables
1
Install the power cord holder and power cord.
It will help prevent the power cable from being
removed by accident.
2
Gather and bind the cables with the cable
holder.
CAUTION
Do not move the TV by holding the cable
y
y
holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
Power Cord Holder
Cable Holder
Advertisement
Table of Contents
