Table of Contents
Advertisement
22
EXTERNAL CONTROL DEVICE SETUP
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to
an external control device (such as a computer or
an A/V control system) to control the product's
functions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
NOTE
RS-232C on this unit is intended to be used
y
y
with third party RS-232C control hardware
and software. The instructions below
are provided to help with programming
software or to test functionality using telenet
software. RS-232C connection cables are not
supplied with the product.
RS-232C IN
(CONTROL & SERVICE)
Type of connector;
D-Sub 9-Pin Male
1
6
RS-232C IN
(CONTROL & SERVICE)
No.
1
3.5V
2
RXD
3
TXD
4
IR out from TV
5
GND
6
NC (No connection)
7
NC (No connection)
8
NC (No connection)
9
NC (No connection)
5
9
Pin name
Advertisement
Table of Contents
