Tidying Cables - LG UB80 Series Owner's Manual

CAUTION
When attaching the stand to the TV
set, place the screen facing down on a
screen from scratches.
Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the TV may
tilt forward after being installed.)
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
NOTE
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
SETTING UP THE TV

Tidying cables

Image shown may differ from your TV.
1 Gather and bind the cables with the Cable
Holder and the Cable Management.
2 Fix the Cable Management firmly to the TV.
(Only UB80**, UB82**, UB83**)
Cable Holder
Cable Management
1 Gather and bind the cables with the Cable
Holder.
(Only UF695*)
Cable Holder
CAUTION
Do not move the TV by holding the cable
holder, as the cable holder may break, and
injuries and damage to the TV may occur.
A-5