Advertisement
Interface
Audio in
Ethernet port
(PoE)
Lens
DI
Micro-SD/SDHC
card slot
Reset button
User can enable the function of the built-in
microphone via audio setting in the Web UI.
The LAN socket is an RJ45 connector for
connection to 10BASE-T Ethernet or 100BASE-TX
Fast Ethernet cabling. Not only can this Ethernet
port detect or negotiate the transmission speed of
the network automatically but also input power for
camera operation. Please use Category 5 cable to
connect the Network Camera to an 802.3af PoE
network switch.
1/2.5" Progressive Scan CMOS
Digital input
User can insert a micro SD card (up to 32G) into
this slot for event recording.
This button is used to restore all the factory
default settings. Sometimes restarting the camera
will make the system return to a normal state.
If the system still got problems after restarting,
user can restore the factory default settings and
configure it again. To restore the device, please
follow the steps below:
1. Press 'Reset' button for 5 seconds to reset the
device to the factory default.
2. Login the camera using the default IP
(http://192.168.0.20), with "admin" for both
username and password.
Restoring the factory default setting
will lose all the previous settings
including IP address forever. User
needs to back up configuration file in
Note
advance before restoring.
Description
Advertisement
