Applicable Directives And Standards; Assembly; Top-Hat Rail Assembly - Primation P-Ex OTR opis 100 User Manual

A Terminal Voltage supply
B Power LED, Link Status LEDs (Chapter 7.2)
C LC MM, LC SM or TX Input
D LC MM or LCSM opis Output
E Type plate
P-Ex OTR opis MC
The speed and the built in transceiver types are marked on the Type plate.

3.7 Applicable Directives and Standards

Directive:
RoHs
Standards for explosion protection:
Electr. operating equipment for areas at risk of gas explosion:
Part 0: General requirements
Electr. operating equipment for areas at risk of gas explosion:
Part 28: Protection of equipment and transfer systems
which work with optical radiation

4 Assembly

4.1 Top-hat rail assembly

The P-Ex OTR opis series is designed as standard for assembly on a top-hat rail system.
When assembling, ensure that the transceiver engages correctly on the top-hat rail and is
seated securely.
To disassembly, pull the strap at the bottom of the top-hat rail clip towards the device and tilt
the P-Ex OTR opis upwards and off the top-hat rail. Ensure that all electrical and optical con-
nections have been disconnected before disassembly.
2002/95/EC
EN 60 079-0: 2012
EN 60 079-28: 2007
EN 60 079-15: 2010
Page | 22