Manual Tests; On The Air Call To Mobile; Infrared Test; Bluetooth Test - Sony Ericsson P1i Test Instruction, Mechanical

5 Manual Tests

5.1

On The Air Call to Mobile

To verify the function of the speaker, microphone, polyphonic ring signal, volumes
button and radio:
1. Insert an operator SIM card and start the phone.
2. Set up a call from another phone to the mobile phone.
3. Answer the phone call.
4. Check that the polyphonic ring signal is working and that the backlight switches
on OK.
5. Also check that the quality of the sound both in the mobile phone and the other
phone are OK.
6. Press the volume key up and down and check that the volume in the phone is
altered.
7. End the call.
8. Check that the ending procedure is OK and that the speech time is displayed.
5.2

Infrared Test

To verify that the Infrared communication is working:
1. Insert a SIM card, connect a battery and start the unit.
2. Activate the function by entering Connectivity/Infrared port and select "10
minutes".
3. Set up an infrared link between an IR device and the phone. The IR-module is
placed on the right side of the phone. If a link can be established, the module is
considered working.
5.3

Bluetooth Test

To verify that the Bluetooth communication is working:
1. Insert a SIM card, connect a battery and start the unit.
2. Activate the Bluetooth function by entering Connectivity/Bluetooth and turn it on.
3. Set up a link between the phone and another Bluetooth compatible device. If a
connection can be established the Bluetooth module is considered working.
2/000 21-1/FEA 209 544/126 B
©
Company Internal Sony Ericsson Mobile Communications AB
Test Instruction, Mechanical
9(13)