Table of Contents
Advertisement
Error Text
Invalid data in HEX file
Exceeded max size
Partition is not valid on this device
Wrong destination code
File type does not support IPL Auto
Select
Non-contiguous record found
Timed Out - No data
Fail: Buffer Overrun
Partition Table not Valid
Invalid file format
Table 10-4. IPL Errors (Continued)
Error Number
-25
The Symbol HEX file being downloaded contains
invalid data. Ensure the file is in proper Symbol HEX
file format with valid HEX data.
-26
The download file is too large to fit into the space
allocated for it. Either make the file smaller or increase
the space allocated for it by altering the partition
table.
-27
The downloaded file specifies a partition entry that
does not exist on the device. Only download files that
are valid for this device, or change the partition table
so that the new file is valid on the device.
-28
A specific partition was chosen from the Main Menu
(not Auto Select) but the file selected for download
was for another partition. Ensure that the partition
selected from the Main Menu matches the file
selected for download.
-29
Monitor, Power Micro and Partition Table cannot be
loaded with Auto Select. Select the appropriate area,
and try again.
-30
A Symbol HEX file download was attempted but the
HEX file is invalid. Ensure the file is in Symbol HEX file
format.
-31
IPL was waiting for data from the source device but
timed out before receiving any. Check the source
device connectivity and retry.
-32
The serial port device could not keep up with incoming
data. Retry the serial download with a lower baud
rate.
-33
The size of flash memory is different than that
described in the partition table. Retry the download
with the correct partition table file.
-34
The file format is invalid. Only Symbol HEX files are
supported by IPL.
Mobile Computer Configuration
Probable Cause
10-25
Advertisement
Table of Contents
